31.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 30.08.2017 bis zum 31.08.2017 wurden 2 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 30.08.2017 vom Typ: Troubleshooting
Titel: Large Java dump files created in the location /storage/log/vmware/perfcharts

Am 30.08.2017 vom Typ: Troubleshooting
Titel: Advanced setting „ScratchConfig.ConfiguredScratchLocation“ for persistent scratch location is reverted to the default value after ESXi 6.5 U1 host reboot

Ausführliche Auflistung:

Titel: Large Java dump files created in the location /storage/log/vmware/perfcharts

Knowledgebase Nr: 2151394

Aktualisiert: 30.08.2017

Für Produkte: VMware vCenter Server 6.5.x

Link zum Artikel: 2151394

Beschreibung:
You see that the /storage/log directory is full and in critical state the appliance manager page in VCSA 6.5. You see that large Java dump files are created at /storage/log/vmware/perfcharts. You see that the alerts are triggered in the vCenter Server VAMI page. You notice that the /storage/log is almost full. root@VCENTER [ ~ ]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/autodeploy_vg-autodeploy 9.8G 33M 9.2G 1%…
… Für weitere Details den Link zum Artikel anklicken

Titel: Advanced setting „ScratchConfig.ConfiguredScratchLocation“ for persistent scratch location is reverted to the default value after ESXi 6.5 U1 host reboot

Knowledgebase Nr: 2151270

Aktualisiert: 30.08.2017

Für Produkte: VMware ESXi 6.5.x

Link zum Artikel: 2151270

Beschreibung:
Advanced setting ScratchConfig.ConfiguredScratchLocationfor persistent scratch location is reverted to the default value after ESXi 6.5 U1 host reboot. Note: Scratch space is configured automatically during installation or first boot of an ESXi host, and is not required to be manually configured. ESXi Installable creates a 4 GB Fat16 partition on the target device during installation if there is sufficient space, and if the device is considered Local. The default value…
… Für weitere Details den Link zum Artikel anklicken

Zurück nach oben

30.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 29.08.2017 bis zum 30.08.2017 wurden 1 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 29.08.2017 vom Typ: How to
Titel: Re-pointing and re-registering VMware vCenter Server Appliance 5.5.x and components

Ausführliche Auflistung:

Titel: Re-pointing and re-registering VMware vCenter Server Appliance 5.5.x and components

Knowledgebase Nr: 2094888

Kategorie: How to

Aktualisiert: 29.08.2017

Link zum Artikel: 2094888

Beschreibung:
After certain changes to your VMware vSphere deployment topography, you may need to re-point or re-register vCenter Server Appliance components with the vCenter Inventory Service or vCenter Single Sign-On and the vCenter Lookup Service to ensure that the components can continue to communicate. Note: This article is designed to assist technical support engineers and customers with repointing services internal to the vCenter Server Appliance. To re-point to an external vCenter Single Sign-On…
… Für weitere Details den Link zum Artikel anklicken

Zurück nach oben

29.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 28.08.2017 bis zum 29.08.2017 wurden 2 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 28.08.2017 vom Typ: Troubleshooting
Titel: Snapshot consolidation after backing up a virtual machine fails with the error: Failed to consolidate disks in Foundry: Error: (15) The file is already in use

Am 28.08.2017 vom Typ: Troubleshooting
Titel: ESXi vmkernel and vmkwarning logs are filled with the alert: „WARNING: VmkMgmtSyncEventIoctl – unable to validate header“

Ausführliche Auflistung:

Titel: Snapshot consolidation after backing up a virtual machine fails with the error: Failed to consolidate disks in Foundry: Error: (15) The file is already in use

Knowledgebase Nr: 2007245

Kategorie: Troubleshooting

Aktualisiert: 28.08.2017

Für Produkte: VMware Consolidated Backup 1.0.x, VMware Consolidated Backup 1.1.x, VMware Consolidated Backup 1.5.x, VMware Data Recovery 1.x, VMware Data Recovery 2.x, VMware ESX 4.0.x, VMware ESX 4.1.x, VMware ESXi 4.0.x Embedded, VMware ESXi 4.0.x Installable, VMware ESXi 4.1.x Embedded, VMware ESXi 4.1.x Installable, VMware ESXi 5.0.x, Virtual Disk Development Kit 1.0.1, Virtual Disk Development Kit 1.1.0, Virtual Disk Development Kit 1.1.1, Virtual Disk Development Kit 1.2, Virtual Disk Development Kit 5.0

Link zum Artikel: 2007245

Beschreibung:
After backing up virtual machines, you see a virtual machine is left with orphan snapshots (the snapshot exists, but it is not referenced by the virtual machine or its .vmx file). The backup solution is running on a virtual machine or a virtual appliance.In the hostd log, you see the error:Failed to consolidate disks in Foundry: Error: (15) The file is already in use In the vmware.log file of the virtual machine, you see errors similar to:failed to open (Failed to lock the file): AIOMgr_Open…
… Für weitere Details den Link zum Artikel anklicken

Titel: ESXi vmkernel and vmkwarning logs are filled with the alert: „WARNING: VmkMgmtSyncEventIoctl – unable to validate header“

Knowledgebase Nr: 2146560

Aktualisiert: 28.08.2017

Für Produkte: VMware ESXi 5.5.x, VMware ESXi 6.0.x

Link zum Artikel: 2146560

Beschreibung:
In the vmkernel log, you may see similar entries:WARNING: VmkMgmtSyncEventIoctl – unable to validate header This affects other logs accuracy as the above message appear so frequently that all other logging is drowned out and rotated.
… Für weitere Details den Link zum Artikel anklicken

Zurück nach oben

26.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 25.08.2017 bis zum 26.08.2017 wurden 9 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 25.08.2017 vom Typ: Troubleshooting
Titel: Certificate Generation Utility for VMware Validated Design for Software-Defined Data Center

Am 25.08.2017 vom Typ: How to
Titel: How to move ESXi/ESX host from one vCenter Server to another

Am 25.08.2017 vom Typ: Informational, Troubleshooting
Titel: VIO Stack-Delete fails when deleting a template with resource group

Am 25.08.2017 vom Typ: Troubleshooting
Titel: Unable to connect to vSphere replication target site

Am 25.08.2017 vom Typ: How to
Titel: Using the pktcap-uw tool in ESXi 5.5 and later

Am 25.08.2017 vom Typ: Informational
Titel: Supported versions of Windows 10 on Horizon 7 Including All VDI Clones (Full Clones, Linked Clones, Instant Clones)

Am 25.08.2017 vom Typ: Troubleshooting
Titel: VDP backups using vSAN Data store fails at 92%

Am 25.08.2017 vom Typ: Troubleshooting
Titel: VMware Cloud Foundations Incorrect vSAN configuration during deployment.

Am 25.08.2017 vom Typ: Troubleshooting
Titel: VMware Cloud Foundations vSAN Health status failed after manually adding hosts

Ausführliche Auflistung:

Titel: Certificate Generation Utility for VMware Validated Design for Software-Defined Data Center

Knowledgebase Nr: 2146215

Aktualisiert: 25.08.2017

Für Produkte: VMware Validated Designed for Software-Defined Data Center (SDDC) 2.0.x, VMware Validated Designed for Software-Defined Data Center (SDDC) 3.0.x, VMware Validated Designed for Software-Defined Data Center (SDDC) 4.0.x

Link zum Artikel: 2146215

Beschreibung:
About Certificate Generation Utility for VMware Validated Designs The Certificate Generation Utility for VMware Validated Designs (CertGenVVD) is a command-line utility that you can use to generate custom certificates for the products that you use to build a Software-Define Data Center (SDDC) based on VMware Validated Design for Software-Defined Data Center. Use the utility to reduce the number of steps for end-to-end certificate replacement. CertGenVVD is based on PowerShell. It operates…
… Für weitere Details den Link zum Artikel anklicken

Titel: How to move ESXi/ESX host from one vCenter Server to another

Knowledgebase Nr: 1004775

Kategorie: How to

Aktualisiert: 25.08.2017

Für Produkte: VMware ESX 3.0.x, VMware ESX 3.5.x, VMware ESX 4.0.x, VMware ESX 4.1.x, VMware ESXi 3.5.x Embedded, VMware ESXi 3.5.x Installable, VMware ESXi 4.0.x Embedded, VMware ESXi 4.0.x Installable, VMware ESXi 4.1.x Embedded, VMware ESXi 4.1.x Installable, VMware ESXi 5.0.x, VMware ESXi 5.1.x, VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware ESXi 6.5.x, VMware VirtualCenter 2.0.x, VMware VirtualCenter 2.5.x, VMware vCenter Server 4.0.x, VMware vCenter Server 4.1.x, VMware vCenter Server 5.0.x, VMware vCenter Server 5.1.x, VMware vCenter Server 5.5.x, VMware vCenter Server 6.0.x, VMware vCenter Server 6.5.x

Link zum Artikel: 1004775

Beschreibung:
This article provides instructions to move a managed ESXi/ESX host from one vCenter Server to another vCenter Server. Considerations prior to migration: VMware recommends you to not migrate ESXESXi hosts with distributed switches. See these articles to migrate the host to standard switches prior to migrating them to a new vCenter Server: Moving an ESX/ESXi host with vDS from one vCenter Server to another (1029498) Exporting/importing/restoring Distributed Switch configs using vSphere Web…
… Für weitere Details den Link zum Artikel anklicken

Titel: VIO Stack-Delete fails when deleting a template with resource group

Knowledgebase Nr: 2151388

Kategorie: Informational, Troubleshooting

Aktualisiert: 25.08.2017

Für Produkte: VMware Integrated OpenStack 3.0.x, VMware Integrated OpenStack 3.1.x

Link zum Artikel: 2151388

Beschreibung:
Deleting the stack fails because the resource group is still using the ports when heat attempts to delete the subnets.when deleting the stack, it seemed that heat did not calclulate the dependencies correctly, and triedto delete the subnet first which led to a conflict:“Conflict: Unable to complete operation on subnet (Subnet Identifier String). One or more ports have an IP allocation from this subnet“
… Für weitere Details den Link zum Artikel anklicken

Titel: Unable to connect to vSphere replication target site

Knowledgebase Nr: 2149741

Aktualisiert: 25.08.2017

Für Produkte: VMware vSphere Replication 6.0.x, VMware vSphere Replication 6.1.x

Link zum Artikel: 2149741

Beschreibung:
Connecting the target site reports an error on web client:“timeout while waiting for the vsphere replication manager server to become connected“ In the HMS.log file, you see error similar to: „2017-04-03 19:35:39.083 TRACE hms.updates.changeManager [tcweb-5] (..vmware.hms.ChangeManagerImpl) operationID=1b51e42c-edab-4822-b326-dd9d91a83c63-HMS-15647017 | Got 0 object changes.2017-04-03 19:35:39.083 TRACE hms.updates.changeManager [tcweb-5] (..vmware.hms.ChangeManagerImpl)…
… Für weitere Details den Link zum Artikel anklicken

Titel: Using the pktcap-uw tool in ESXi 5.5 and later

Knowledgebase Nr: 2051814

Kategorie: How to

Aktualisiert: 25.08.2017

Für Produkte: VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2051814

Beschreibung:
The pktcap-uw tool is an enhanced packet capture and analysis tool that can be used in place of the legacy tcpdump-uw tool. The pktcap-uw tool is included by default in ESXi 5.5 and later versions. This article provides information on using the pktcap-uw tool for packet capture and analysis.Note: The tcpdump-uw tool can only capture packets/frames at the vmkernel interface level and cannot capture frames at the uplinks, or vSwitch, or virtual port levels. The new pktcap-uw tool allows traffic…
… Für weitere Details den Link zum Artikel anklicken

Titel: Supported versions of Windows 10 on Horizon 7 Including All VDI Clones (Full Clones, Linked Clones, Instant Clones)

Knowledgebase Nr: 2149393

Kategorie: Informational

Aktualisiert: 25.08.2017

Für Produkte: VMware Horizon 6 version 6.2.x, VMware Horizon 7 version 7.0.x, VMware Horizon 7 version 7.1.x, VMware Horizon 7 version 7.2.x

Link zum Artikel: 2149393

Beschreibung:
This article is designed to track the supported versions of Windows 10 along with the releases of VMware Horizon 7.For Windows Guest OS support other than Windows 10, see KB 2150295.
… Für weitere Details den Link zum Artikel anklicken

Titel: VDP backups using vSAN Data store fails at 92%

Knowledgebase Nr: 2148886

Kategorie: Troubleshooting

Aktualisiert: 25.08.2017

Für Produkte: VMware vSphere Data Protection 5.5.x, VMware vSphere Data Protection 5.8.x, VMware vSphere Data Protection 6.0.x

Link zum Artikel: 2148886

Beschreibung:
When running an image backup of a VM client, the backup fails at 92% and never completes. In the /space/avamarclient directory for the VM’s back up job, you see entries similar to:The VDDK crashes when connecting to the second VMDK via hotadd2017-01-13T02:33:19.768+04:00 avvcbimage Info <16041>: VDDK:VixDiskLibVim: VixDiskLibVim_GetNfcTicket: Get NFC ticket for [MARVIN-Virtual-SAN-Datastore-8a3d2478-f258-441b-b192-ad6acd1eb724] f7e3bd57-6098-0e83-785a-54ab3a4df283/VMware vCenter Server…
… Für weitere Details den Link zum Artikel anklicken

Titel: VMware Cloud Foundations Incorrect vSAN configuration during deployment.

Knowledgebase Nr: 2151437

Aktualisiert: 25.08.2017

Für Produkte: VMware SDDC Manager 2.1.x

Link zum Artikel: 2151437

Beschreibung:
The vSAN is not configured as expected prior to the VMware Cloud Foundations deployment.
… Für weitere Details den Link zum Artikel anklicken

Titel: VMware Cloud Foundations vSAN Health status failed after manually adding hosts

Knowledgebase Nr: 2151415

Aktualisiert: 25.08.2017

Für Produkte: VMware SDDC Manager 2.1.x

Link zum Artikel: 2151415

Beschreibung:
vSAN health status failed after manually adding hosts to VMware Cloud Foundations workload domain. In the example screenshot provided please note the Cluster failure: Advanced Virtual SAN configuration in sync. You will see the exact miss-configuration with the VSAN.goto11 and Net.TcpipHeapMax settings.
… Für weitere Details den Link zum Artikel anklicken

Zurück nach oben

25.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 24.08.2017 bis zum 25.08.2017 wurden 24 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 24.08.2017 vom Typ: Troubleshooting
Titel: VMware Horizon View HTML Blast access fails with the error: An error has occurred: code:ECONNRESET

Am 24.08.2017 vom Typ: Informational, Troubleshooting
Titel: Changing the hard disk mode of a virtual machine fails with the error: Access to resource settings on the host is restricted to the server which is managing it

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Unable to remove missing containers from a placement in vRealize Automation 7.2.x

Am 24.08.2017 vom Typ: Informational, Patch, Troubleshooting
Titel: [Internal] vRealize Operations Manager 6.5 Hot Fix 3

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Upgrading SRM from 6.5 to 6.5.1 using embedded vpostgres db fails

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Unable to start vCenter Server Inventory service

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Overview of Backup and Restore options in vCenter Server 6.x

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Error „Logon failure: the user has not been granted the requested logon type at this computer“

Am 24.08.2017 vom Typ: Best Practices, Troubleshooting
Titel: Windows vCenter Server upgrade fails with the error „Installation of component VMware vCenter Server failed with error code 3010“

Am 24.08.2017 vom Typ: Troubleshooting
Titel: ESXi host loses connectivity to a VMFS3 and VMFS5 datastore

Am 24.08.2017 vom Typ: How to
Titel: Increasing the disk space for the VMware vCenter Server Appliance in vSphere 6.0

Am 24.08.2017 vom Typ: Troubleshooting
Titel: After installing or upgrading to vRA 7.1, there is no custom background image on the login screen

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Adding datastore to an ESXi host fails with the error :The ‚Create VMFS datastore‘ operation failed for the entity with the following error message. Cannot change the host configuration

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Error „No VRM Server registered with vCenter Server“ while creating protection group in SRM 6.1 using vSphere Replication

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Datastore disconnect issue when using lsi_mr3 async drivers

Am 24.08.2017 vom Typ: Troubleshooting
Titel: The vpxd service fails to start after vCenter is migrated from vSphere 6.0 to 6.5

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Unable to consolidate virtual machine snapshots due to file lock by VDP appliance

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Internal parent VM for Horizion Instant Clones triggers memory usage alert in vCenter

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Connection to iSCSI Datastore is lost with the error „(inaccessible)“

Am 24.08.2017 vom Typ: Troubleshooting
Titel: VLAN Tagging issues with Intel X710 network adapters

Am 24.08.2017 vom Typ: Informational
Titel: Deploying a Metro Storage Cluster across two sites using HUAWEI OceanStor V3 HyperMetro and VMware vSphere

Am 24.08.2017 vom Typ: Troubleshooting
Titel: When using ESXi 6.0 and vCenter Server 6.5, adding an instant-clone desktop pool fails with the error: The resource “ is in use.

Am 24.08.2017 vom Typ: Troubleshooting
Titel: Deploying a Metro Storage Cluster across two sites using HUAWEI OceanStor Dorado V3 HyperMetro and VMware vSphere

Am 24.08.2017 vom Typ: Troubleshooting
Titel: vCenter slows down/stops responding when it is added as an endpoint in vRB

Ausführliche Auflistung:

Titel: VMware Horizon View HTML Blast access fails with the error: An error has occurred: code:ECONNRESET

Knowledgebase Nr: 2056649

Kategorie: Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware Horizon View 5.2.x

Link zum Artikel: 2056649

Beschreibung:
Unable to access View desktops through Horizon View HTML Blast. Cannot connect to View desktops from Windows XP Client machines over Horizon View HTML Blast access. You see the error:An error has occurred: code:ECONNRESET The View Agent log file contains entries similar to:Log Findings:<YYYY-MM-DD>T<Time>.833] [DEBUG] 1420 [absg-master] – on session change (connection created): #of connections to host xx.xx.xx.xx changed by 1 to 1<YYYY-MM-DD>T<Time>.833] [DEBUG] 3632…
… Für weitere Details den Link zum Artikel anklicken

Titel: Changing the hard disk mode of a virtual machine fails with the error: Access to resource settings on the host is restricted to the server which is managing it

Knowledgebase Nr: 2021618

Kategorie: Informational, Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 5.0.x, VMware ESXi 5.1.x, VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware vCenter Server 5.0.x, VMware vCenter Server 5.1.x, VMware vCenter Server 5.5.x, VMware vCenter Server 6.0.x

Link zum Artikel: 2021618

Beschreibung:
When you are connected directly to an ESXi host managed in vCenter Server and you attempt to change the virtual hard disk mode for a virtual machine, you see an error similar to:Access to resource settings on the host is restricted to the server ‚x.x.x.x‘ which is managing it On ESXi, you see the message:Access to resource settings on the host is restricted to the server that is managing it: ‚x.x.x.x‘
… Für weitere Details den Link zum Artikel anklicken

Titel: Unable to remove missing containers from a placement in vRealize Automation 7.2.x

Knowledgebase Nr: 2150200

Kategorie: Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware vRealize Automation 7.2.x

Link zum Artikel: 2150200

Beschreibung:
When you are running vRealize Automation 7.2 without provisioned containers in Placement, you experience these symptoms: Under the Containers tab in Placements, hovering over the Instances field shows the text „X of Y“. Where X is a non-zero number and Y is Unlimited or the maximum number of instances. When you click on the „X of Y“, it leads you to an empty list of containers for that placement. You are unable to edit the Placement zone or the CPU shares for that placement. You are unable…
… Für weitere Details den Link zum Artikel anklicken

Titel: [Internal] vRealize Operations Manager 6.5 Hot Fix 3

Knowledgebase Nr: 2151439

Kategorie: Informational, Patch, Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware vRealize Operations Manager 6.5.x

Link zum Artikel: 2151439

Beschreibung:
The vRealize Operations Manager 6.5 Hot Fix 3 is a non-public Hot Fix release that includes all previous fixes from vRealize Operations Manager 6.5 Hot Fix 1 and vRealize Operations Manager 6.5 Hot Fix 2 plus addresses the following issues:PR 1891562 – vSphere Tags Hot Fix Request for vROpsPR 1841340 – „Parent Datacenter“ column being blank in Dashboard for all the cluster compute resourcesPR 1843026 – OPCX_8545_Allocated_vCPUs & OPCX_8545_Allocated_memory has dropped collection on March…
… Für weitere Details den Link zum Artikel anklicken

Titel: Upgrading SRM from 6.5 to 6.5.1 using embedded vpostgres db fails

Knowledgebase Nr: 2151077

Aktualisiert: 24.08.2017

Für Produkte: VMware Site Recovery Manager 6.5.x

Link zum Artikel: 2151077

Beschreibung:
Upgrading SRM to version 6.5.1 fails with this error: VMware: Srm::Installation::Database::GetEmbeddedDbInstalldir: ERROR: Cannot find embedded database server installation directory C:Program FilesVMwareVMware vCenter Site Recovery Manager Embedded Database9.3. VMware: Srm::Installation::Database::GetEmbeddedDbInstalldir: ERROR: Cannot find embedded database server installation directory C:Program FilesVMwareVMware vCenter Site Recovery Manager Embedded Database. VMware:…
… Für weitere Details den Link zum Artikel anklicken

Titel: Unable to start vCenter Server Inventory service

Knowledgebase Nr: 2151435

Aktualisiert: 24.08.2017

Für Produkte: VMware vCenter Server 5.5.x, VMware vCenter Server 6.0.x

Link zum Artikel: 2151435

Beschreibung:
Unable to start vCenter Server Inventory service In invsvc.log, located at %ALLUSERSPROFILE%VMWarevCenterServerlogsinvsvcinvsvc.log, you see entries similar to,org.apache.commons.dbcp.SQLNestedException: Cannot create PoolableConnectionFactory (Cannot open database „VCDB“ requested by the login. The login failed.)
… Für weitere Details den Link zum Artikel anklicken

Titel: Overview of Backup and Restore options in vCenter Server 6.x

Knowledgebase Nr: 2149237

Aktualisiert: 24.08.2017

Für Produkte: VMware vCenter Server 6.0.x, VMware vCenter Server 6.5.x, VMware vCenter Server Appliance 6.0.x, VMware vCenter Server Appliance 6.5.x

Link zum Artikel: 2149237

Beschreibung:
This article provides an overview of Backup and Restore options available for vCenter Server 6.x
… Für weitere Details den Link zum Artikel anklicken

Titel: Error „Logon failure: the user has not been granted the requested logon type at this computer“

Knowledgebase Nr: 2148054

Aktualisiert: 24.08.2017

Für Produkte: VMware vCenter Server 6.5.x

Link zum Artikel: 2148054

Beschreibung:
vCenter Server 6.5 Windows services under VMware Service life cycle Manager (vmon) fails to start. Running the Service-control –start –all command times out with an error similar to:#services-control –start –all…………..2017-02-28T14:52:20.394Z Service vmware-psc-client does not seem to be registered with vMon. If this is unexpected please make sure your service config is a valid json. Also check vmon logs for warnings.2017-02-28T14:52:20.394Z State for service vmware-psc-client:…
… Für weitere Details den Link zum Artikel anklicken

Titel: Windows vCenter Server upgrade fails with the error „Installation of component VMware vCenter Server failed with error code 3010“

Knowledgebase Nr: 2149266

Kategorie: Best Practices, Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware vCenter Server 6.0.x

Link zum Artikel: 2149266

Beschreibung:
Windows vCenter Server 6.x upgrade fails with the error:“Installation of component VMware vCenter Server failed with error code ‚3010‘. Check the logs for more details“ In the %TEMP%vminst.log file, you see entries similar to:<YYYY-MM-DD>T<TIME>| vcsInstUtil-5318198| E: wWinMain: MSI result of install of „E:vCenter-ServerPackagesvmware-vpxd.msi“ may have failed: 3010 (0x00000bc2)<YYYY-MM-DD>T<TIME>| vcsInstUtil-4541944| E: LaunchPkgMgr: Operation on vmware-vpxd.msi…
… Für weitere Details den Link zum Artikel anklicken

Titel: ESXi host loses connectivity to a VMFS3 and VMFS5 datastore

Knowledgebase Nr: 2113956

Kategorie: Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2113956

Beschreibung:
An ESXi 5.5 Update 2 or ESXi 6.0 host loses connectivity to a VMFS5 datastore, while using the VAAI ATS heartbeat in your environment. Note: For additional symptoms and log entries, see the Additional Information section.
… Für weitere Details den Link zum Artikel anklicken

Titel: Increasing the disk space for the VMware vCenter Server Appliance in vSphere 6.0

Knowledgebase Nr: 2126276

Kategorie: How to

Aktualisiert: 24.08.2017

Für Produkte: VMware vCenter Server Appliance 6.0.x

Link zum Artikel: 2126276

Beschreibung:
This article provides steps to increase the disk space of a specific VMDK for the vCenter Server Appliance 6.x. With the introduction of Logical Volume Management (LVM) in vSphere 6.0, you are now able to dynamically increase the disk size of the vCenter Server disks. This table provides a list of VMDKs and their respective components within the vCenter Server Appliance: Note: The sizes provided are generated from a vCenter Server Appliance deployed using a Tiny specification. Your…
… Für weitere Details den Link zum Artikel anklicken

Titel: After installing or upgrading to vRA 7.1, there is no custom background image on the login screen

Knowledgebase Nr: 2147171

Kategorie: Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware vRealize Automation 7.1.x

Link zum Artikel: 2147171

Beschreibung:
After installation of vRealize Automation 7.1 or upgrade from vRealize Automation 7.0.x to 7.1, the custom background image on the login page is missing. Customized branding present in vRealize Automation 7.0.x is missing on the tenant login page after a new installation or upgrade to vRealize Automation 7.1.
… Für weitere Details den Link zum Artikel anklicken

Titel: Adding datastore to an ESXi host fails with the error :The ‚Create VMFS datastore‘ operation failed for the entity with the following error message. Cannot change the host configuration

Knowledgebase Nr: 2151431

Kategorie: Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 6.5.x

Link zum Artikel: 2151431

Beschreibung:
Cannot add a datastore to the ESXi hostYou see an error message similar to: The ‚Create VMFS datastore‘ operation failed for the entity with the following error message. Cannot change the host configuration.
… Für weitere Details den Link zum Artikel anklicken

Titel: Error „No VRM Server registered with vCenter Server“ while creating protection group in SRM 6.1 using vSphere Replication

Knowledgebase Nr: 2139579

Kategorie: Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware vCenter Site Recovery Manager 6.0.x, VMware vSphere Replication 6.1.x

Link zum Artikel: 2139579

Beschreibung:
Keine Beschreibung verfügbar.
… Für weitere Details den Link zum Artikel anklicken

Titel: Datastore disconnect issue when using lsi_mr3 async drivers

Knowledgebase Nr: 2151234

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 6.0.x

Link zum Artikel: 2151234

Beschreibung:
When ESXi running with lsi_mr3-6.x async drivers installed and in use, you experience these symptoms: lsi_mr3 driver fails to handle dozens of VIRT_RESET (vm power up) causes local datastores to disconnect and VMs to become unresponsive. In the /var/log/vmkernel.log file, you see entries similar to:2016-10-28T00:55:34.311Z cpu6:3476932)lsi_mr3: fusionWaitForOutstanding:2851: megasas: [ 0]waiting for 0 commands to complete2016-10-28T00:55:36.723Z cpu16:33517)WARNING: HBX: 1245: Lease has…
… Für weitere Details den Link zum Artikel anklicken

Titel: The vpxd service fails to start after vCenter is migrated from vSphere 6.0 to 6.5

Knowledgebase Nr: 2151430

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2151430

Beschreibung:
The vpxd service fails to start after vCenter is migrated from vSphere 6.0 to 6.5In the vpxd.log file, you see entries similar to:2017-04-25T03:14:39.998Z error vpxd[7F2519F4A800] [Originator@6876 sub=AuthzStorageProvider] [AuthzStorageProvider::CreateAuthzMgr] Failed to connect to IS: <N5Vmomi5Fault17HostCommunication9ExceptionE(vmodl.fault.HostCommunication)–>…
… Für weitere Details den Link zum Artikel anklicken

Titel: Unable to consolidate virtual machine snapshots due to file lock by VDP appliance

Knowledgebase Nr: 2151402

Aktualisiert: 24.08.2017

Für Produkte: VMware vCenter Server 5.5.x, VMware vCenter Server 6.0.x, VMware vCenter Server 6.5.x, VMware vCenter Server Appliance 5.5.x, VMware vCenter Server Appliance 6.0.x, VMware vCenter Server Appliance 6.5.x, VMware vSphere Data Protection 6.0.x, VMware vSphere Data Protection 6.1.x

Link zum Artikel: 2151402

Beschreibung:

You are unable to consolidate VM snapshot due to file lock. Backup operation on the VDP appliance fails or is interrupted.
… Für weitere Details den Link zum Artikel anklicken

Titel: Internal parent VM for Horizion Instant Clones triggers memory usage alert in vCenter

Knowledgebase Nr: 2151438

Aktualisiert: 24.08.2017

Link zum Artikel: 2151438

Beschreibung:
Parent VM is one of the internal VMs that Horizon creates as a part of the instant clone provisioning process. The Parent VM is quiesced and then forked to create the resulting instant clones.This high memory usage alert in vCenter is a false alarm. Because Parent VMs get quiesced during their boot up process, their memory usage will remain frozen. So if the quiescing happens while the memory usage is high, it will stay high and trigger a memory usage alert in vCenter. … Für weitere Details den Link zum Artikel anklicken

Titel: Connection to iSCSI Datastore is lost with the error „(inaccessible)“

Knowledgebase Nr: 2151403

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 6.5.x

Link zum Artikel: 2151403

Beschreibung:
Connection to iSCSI Datastore is lost with the error (inaccessible). In the /var/log/vmkernel.log file, you see entries similar to:2017-03-14T08:15:19.484Z cpu12:69640)Tcpip: 2998: msleep returned 42017-03-14T08:15:19.572Z cpu16:69640)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x43072c894850 network resource pool netsched.pools.persist.iscsi associated2017-03-14T08:15:19.572Z cpu16:69640)iscsi_vmk: iscsivmk_ConnNetRegister: socket 0x43072c894850 network tracker id 940406530…
… Für weitere Details den Link zum Artikel anklicken

Titel: VLAN Tagging issues with Intel X710 network adapters

Knowledgebase Nr: 2149781

Kategorie: Troubleshooting

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2149781

Beschreibung:
When pinging from a virtual machine (or from a vmkernel adapter) in a VLAN tagged portgroup, the ping response may return into ESXi (through the pNic) without a VLAN tag Running the pktcap-uw command displays entries similar to:#pktcap-uw –capture Drop –srcip 10.1.100.10The session capture point is DropThe session filter source IP address is 10.1.100.10No server port specifed, select 5710 as the portOutput the packet info to console.Local CID 2Listen on port 5710Accept…Vsock connection…
… Für weitere Details den Link zum Artikel anklicken

Titel: Deploying a Metro Storage Cluster across two sites using HUAWEI OceanStor V3 HyperMetro and VMware vSphere

Knowledgebase Nr: 2145073

Kategorie: Informational

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 5.1.x, VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2145073

Beschreibung:
This article provides information about deploying a Metro Storage Cluster across two sites using HUAWEI HyperMetro and VMware vSphere.
… Für weitere Details den Link zum Artikel anklicken

Titel: When using ESXi 6.0 and vCenter Server 6.5, adding an instant-clone desktop pool fails with the error: The resource “ is in use.

Knowledgebase Nr: 2150925

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 6.0.x, VMware Horizon 7 version 7.0.x, VMware Horizon 7 version 7.1.x, VMware Horizon 7 version 7.2.x, VMware vCenter Server 6.5.x

Link zum Artikel: 2150925

Beschreibung:
Symptoms:Adding instant-clone desktop fails.On vCenter Server the VitualMachine.createForkChild.label task fails with the error: The resource ‚<number>‘ is in use.Cause:This issue occurs because of an internal design incompatibility in port binding between ESXi 6.0 and vCenter Server 6.5 when instant clone deployment is used. Currently, instant clone works when the versions of ESXi and vCenter Server are the same. (i.e. ESXi 6.0 with vCenter Server 6.0 or ESXi 6.5 with vCenter Server 6.5…
… Für weitere Details den Link zum Artikel anklicken

Titel: Deploying a Metro Storage Cluster across two sites using HUAWEI OceanStor Dorado V3 HyperMetro and VMware vSphere

Knowledgebase Nr: 2150903

Aktualisiert: 24.08.2017

Für Produkte: VMware ESXi 5.1.x, VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2150903

Beschreibung:
This article provides information about deploying a Metro Storage Cluster across two sites using HUAWEI OceanStor Dorado V3 HyperMetro and VMware vSphere.
… Für weitere Details den Link zum Artikel anklicken

Titel: vCenter slows down/stops responding when it is added as an endpoint in vRB

Knowledgebase Nr: 2151324

Kategorie: Troubleshooting

Aktualisiert: 24.08.2017

Link zum Artikel: 2151324

Beschreibung:
vCenter Server will be slowing down gradually when it is added to vRB as an endpoint. This issue is specific to vRB 7.3 versionThe issue is primarily seen in large vCenter Server with high churn environment, However it is advised to apply the patch in vRBC system monitoring your vCenter servers.
… Für weitere Details den Link zum Artikel anklicken

Zurück nach oben

24.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 23.08.2017 bis zum 24.08.2017 wurden 17 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 23.08.2017 vom Typ: Troubleshooting
Titel: Host reports lost communication with ESX module when using instant clone

Am 23.08.2017 vom Typ: Troubleshooting
Titel: vSAN Cluster Incorrectly Displays Network Mode as Multicast

Am 23.08.2017 vom Typ: Troubleshooting
Titel: Outlook Search Indexing with App Volumes

Am 23.08.2017 vom Typ: Troubleshooting
Titel: View Administrator portal fails to launch after upgrading from VMware Horizon View 5.2 to 5.3

Am 23.08.2017 vom Typ: Troubleshooting
Titel: Performance charts are empty and displays the error: Request processing is restricted by administrator

Am 23.08.2017 vom Typ: Troubleshooting
Titel: Directories Management Identity Manager fails to start after Horizon-Workspace restart

Am 23.08.2017 vom Typ: Troubleshooting
Titel: Component metadata health check fails with invalid state error

Am 23.08.2017 vom Typ: Troubleshooting
Titel: Windows 10 host where Credential Guard or Device Guard is enabled fails when running Workstation

Am 23.08.2017 vom Typ: Certification
Titel: Dell EMC Ready Bundles for Virtualization 1.1 on VMware Validated Design 4.0

Am 23.08.2017 vom Typ: Troubleshooting
Titel: DLR takes 1 to 1.5 secs for ARP resolution

Am 23.08.2017 vom Typ: Troubleshooting
Titel: Disable ThinPrint default printer redirection

Am 23.08.2017 vom Typ: Troubleshooting
Titel: VMware Mirage Power Settings

Am 23.08.2017 vom Typ: Informational
Titel: Troubleshooting NSX for vSphere 6.x Edge appliance

Am 23.08.2017 vom Typ: Troubleshooting
Titel: NVIDIA Tesla card shows Active Mode as Basic and Memory as 0.00 B in vSphere Web Client

Am 23.08.2017 vom Typ: Troubleshooting
Titel: vCenter Server stops responding during SRM Non-Disruptive Tests due to deadlocks

Am 23.08.2017 vom Typ: Troubleshooting
Titel: Error „Unexpected error checking compliance: module ’string‘ has no attribute ‚atoi'“ during Host Profile compliance check

Am 23.08.2017 vom Typ: Troubleshooting
Titel: Guest Introspection memory usage spikes to 90+% or you see the error: „Lost communication with ESX module“ in NSX-V 6.3

Ausführliche Auflistung:

Titel: Host reports lost communication with ESX module when using instant clone

Knowledgebase Nr: 2148690

Kategorie: Troubleshooting

Aktualisiert: 23.08.2017

Für Produkte: VMware NSX for vSphere 6.2.x, VMware NSX for vSphere 6.3.x

Link zum Artikel: 2148690

Beschreibung:
After deploying a Guest Introspection on an ESXi host with Instant Clone VMs running the Thin agent, the Guest Introspection service goes into Warning status on the Service Deployment. On the host, under Monitor > Guest Introspection, you see an error similar to: Lost communication with ESX module.
… Für weitere Details den Link zum Artikel anklicken

Titel: vSAN Cluster Incorrectly Displays Network Mode as Multicast

Knowledgebase Nr: 2150523

Aktualisiert: 23.08.2017

Für Produkte: VMware vSAN 6.6.x

Link zum Artikel: 2150523

Beschreibung:
If the vSAN management service cannot fetch API version information for hosts in the vSAN cluster, it might not be able to update the host version information. This communication problem can cause configuration errors in the cluster. The vSAN cluster might incorrectly display the networking mode as multicast. You cannot add a new host to the cluster. In the /var/log/vmware/vsan-health/vmware-vsan-health-service.log file, you see entries similar to:2017-05-16T08:37:09.542Z INFO…
… Für weitere Details den Link zum Artikel anklicken

Titel: Outlook Search Indexing with App Volumes

Knowledgebase Nr: 2149799

Kategorie: Troubleshooting

Aktualisiert: 23.08.2017

Für Produkte: VMware App Volumes 2.12.x

Link zum Artikel: 2149799

Beschreibung:
User with a Writable Volume attached and trying to do an Advanced Search in Outlook by right-clicking on a message and choosing “find related messages” might cause the application to crash. This might also occur on other Office applications when Search Index is enabled. Versions of Office affected are Office 2013and Office 365 (2013 and 2016). The Office application can be natively installed or in an AppStack, results are the same
… Für weitere Details den Link zum Artikel anklicken

Titel: View Administrator portal fails to launch after upgrading from VMware Horizon View 5.2 to 5.3

Knowledgebase Nr: 2075114

Kategorie: Troubleshooting

Aktualisiert: 23.08.2017

Für Produkte: VMware Horizon 6 version 6.2.x, VMware Horizon View 5.3.x, VMware View 6.0.x

Link zum Artikel: 2075114

Beschreibung:
The View Administrator portal fails to load after upgrading from Horizon View 5.2 to 5.3. In the View Connection Server debug log file, you see entries similar to:2014-01-22T22:49:02.350-08:00 ERROR (0EE0-0F28) <javabridge> [ws_java_bridgeDLL] Java Bridge Managed failed on serviceClass = jniEnv->FindClass(serviceClassName._mstr())2014-01-22T22:49:02.350-08:00 ERROR (0EE0-0F28) <javabridge> [ws_java_bridgeDLL] Exception in JavaService::Init Affected upgrade paths: 5.1.x ->…
… Für weitere Details den Link zum Artikel anklicken

Titel: Performance charts are empty and displays the error: Request processing is restricted by administrator

Knowledgebase Nr: 2107096

Aktualisiert: 23.08.2017

Für Produkte: VMware ESXi 6.0.x, VMware vCenter Server 5.5.x, VMware vCenter Server 6.0.x, VMware vCenter Server 6.5.x

Link zum Artikel: 2107096

Beschreibung:
When you select a cluster and view the performance charts, you see the error:Request processing is restricted by administrator.This message is displayed when you attempt to view performance charts for clusters, resource pools, or other objects. You may see this message for overview charts and for advanced performance charts. When you right-click a host in the vSphere Client and select Report Performance, you see the error:A specified parameter was not correct. querySpec.sizeCall…
… Für weitere Details den Link zum Artikel anklicken

Titel: Directories Management Identity Manager fails to start after Horizon-Workspace restart

Knowledgebase Nr: 2151103

Kategorie: Troubleshooting

Aktualisiert: 23.08.2017

Für Produkte: VMware vRealize Automation 7.3.x

Link zum Artikel: 2151103

Beschreibung:
In a vRealize Automation high availability environment, the Directories Management Identity Manager can fail to start after the horizon-workspace service is restarted. The horizon-workspace service is unable to start. You see an error similar to:Error creating bean with name ‚liquibase‘ defined in class path resource [spring/datastore-wireup.xml]: Invocation of init method failed; nested exception is liquibase.exception.LockException: Could not acquire change log lock. Currently locked by…
… Für weitere Details den Link zum Artikel anklicken

Titel: Component metadata health check fails with invalid state error

Knowledgebase Nr: 2145347

Kategorie: Troubleshooting

Aktualisiert: 23.08.2017

Für Produkte: VMware vSAN 6.0.x, VMware vSAN 6.1.x, VMware vSAN 6.2.x, VMware vSAN 6.5.x

Link zum Artikel: 2145347

Beschreibung:
The vSAN Health check plug-in reports the Component metadata health test as Failed. The component UUID reports the component state as Invalid state. At the cluster level in your vCenter Server > Monitor > Virtual San > Health, you see an error similar to:
… Für weitere Details den Link zum Artikel anklicken

Titel: Windows 10 host where Credential Guard or Device Guard is enabled fails when running Workstation

Knowledgebase Nr: 2146361

Aktualisiert: 23.08.2017

Für Produkte: VMware Workstation Pro 12.x (Windows)

Link zum Artikel: 2146361

Beschreibung:
Running Workstation on a Windows 10 host where Credential Guard or Device Guard is enabled fails with a blue diagnostic screen (BSOD).
… Für weitere Details den Link zum Artikel anklicken

Titel: Dell EMC Ready Bundles for Virtualization 1.1 on VMware Validated Design 4.0

Knowledgebase Nr: 2151390

Kategorie: Certification

Aktualisiert: 23.08.2017

Link zum Artikel: 2151390

Beschreibung:
This article provides information about the VMware SDDC on Dell EMC Ready Bundles.
… Für weitere Details den Link zum Artikel anklicken

Titel: DLR takes 1 to 1.5 secs for ARP resolution

Knowledgebase Nr: 2151374

Kategorie: Troubleshooting

Aktualisiert: 23.08.2017

Für Produkte: VMware NSX for vSphere 6.2.x, VMware NSX for vSphere 6.3.x

Link zum Artikel: 2151374

Beschreibung:
When ARP suppression fails, local DLR’s ARP resolution for a VM running in a remote host takes around 1 to 1.5 seconds.
… Für weitere Details den Link zum Artikel anklicken

Titel: Disable ThinPrint default printer redirection

Knowledgebase Nr: 2151396

Aktualisiert: 23.08.2017

Link zum Artikel: 2151396

Beschreibung:
This article provides steps to disable ThinPrint default printer redirection for Horizon agents.
… Für weitere Details den Link zum Artikel anklicken

Titel: VMware Mirage Power Settings

Knowledgebase Nr: 2151427

Aktualisiert: 23.08.2017

Für Produkte: VMware Mirage 5.x

Link zum Artikel: 2151427

Beschreibung:
VMware Mirage power settings include a configuration option on the desktop client: mergeBiPowerSettings. If set to false, the default option, then no user power settings will be merged in from the base layer, and the client’s power settings remain 100% the same. If set to true, then the previous functionality occurs, where settings are merged.
… Für weitere Details den Link zum Artikel anklicken

Titel: Troubleshooting NSX for vSphere 6.x Edge appliance

Knowledgebase Nr: 2140009

Kategorie: Informational

Aktualisiert: 23.08.2017

Für Produkte: VMware NSX for vSphere 6.0.x, VMware NSX for vSphere 6.1.x, VMware NSX for vSphere 6.2.x, VMware NSX for vSphere 6.3.x

Link zum Artikel: 2140009

Beschreibung:
This article provides information about troubleshooting the VMware NSX for vSphere 6.x Edge appliance.
… Für weitere Details den Link zum Artikel anklicken

Titel: NVIDIA Tesla card shows Active Mode as Basic and Memory as 0.00 B in vSphere Web Client

Knowledgebase Nr: 2150436

Kategorie: Troubleshooting

Aktualisiert: 23.08.2017

Für Produkte: VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2150436

Beschreibung:
After installing an NVIDIA M6, M10, or M60 graphics card in your ESXi host and loading the corresponding VIB, you are unable to assign VMs to the graphics card. In the Host -> Configure -> Hardware -> Graphics -> Graphics Devices tab, the Configured Type might be set to Shared or Shared Direct, and yet Active Type will show Basic. The Memory field will show 0.00 B. From an SSH session, running the command cat /var/log/Xorg.log | grep -E „GPU|nv“ will show no results.
… Für weitere Details den Link zum Artikel anklicken

Titel: vCenter Server stops responding during SRM Non-Disruptive Tests due to deadlocks

Knowledgebase Nr: 2151237

Aktualisiert: 23.08.2017

Für Produkte: VMware vCenter Server 6.0.x

Link zum Artikel: 2151237

Beschreibung:
vCenter Server stops responding when an SRM Non-Disruptive test is triggered. In the %ALLUSERSPROFILE%VMWarevCenterServerlogsvmware-vpxvpxd.log file on vCenter Server, you see the entries similar to:2017-07-05T18:43:30.633+10:00 warning vpxd[20312] [Originator@6876 sub=VpxProfiler opID=4460fc2f:25b6:1f21:1d5c:5019-32-23] VpxdInvtDVS::ProcessVmChangeInfo [DvsProcessVmChangeTime] took 4285 ms2017-07-05T18:43:30.636+10:00 warning vpxd[20312] [Originator@6876 sub=VpxProfiler…
… Für weitere Details den Link zum Artikel anklicken

Titel: Error „Unexpected error checking compliance: module ’string‘ has no attribute ‚atoi'“ during Host Profile compliance check

Knowledgebase Nr: 2151227

Kategorie: Troubleshooting

Aktualisiert:
23.08.2017

Für Produkte: VMware ESXi 6.5.x

Link zum Artikel: 2151227

Beschreibung:
Host Profile compliance check fails with error Unexpected error checking compliance: module ’string‘ has no attribute ‚atoi‘ In the hostprofiletrace.log
file, you see entries similar to:2017-04-10T04:30:32Z Host Profiles[1141210 opID=ComplianceActionResolver-applyOnMultiEntity-109004-ngc-58-SWI-3ed1987-c2-f6e3]: ERROR: Exception while checking host compliance. Exception: module ’string‘ has no attribute ‚atoi’^@2017-04-10T04:30:32Z Host Profiles[1141210…
… Für weitere Details den Link zum Artikel anklicken

Titel:
Guest Introspection memory usage spikes to 90+% or you see the error: „Lost communication with ESX module“ in NSX-V 6.3

Knowledgebase Nr: 2151235

Kategorie: Troubleshooting

Aktualisiert:
23.08.2017

Für Produkte: VMware NSX for vSphere 6.2.x, VMware NSX for vSphere 6.3.x

Link zum Artikel: 2151235

Beschreibung:
In a VMware NSX for vSphere 6.3.x environment where Guest Introspection is installed, you see these
symptoms: Intermittent network I/O disruption on virtual machines protected by the Guest Introspection (GI) agentless antivirus protection. Memory usage
on the Guest Introspection USVM spikes to nearly 100% at the same time impact to virtual machines is observed. In the Tasks and Events tab for the ESXi host on which the affected virtual machines are running, you see the error similar to:Lost…
… Für weitere
Details den Link zum Artikel anklicken

Zurück nach oben

23.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 22.08.2017 bis zum 23.08.2017 wurden 22 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 22.08.2017 vom Typ: How to
Titel: Uploading diagnostic information for VMware

Am 22.08.2017 vom Typ: Troubleshooting
Titel: Certificate Generation Utility for VMware Validated Design for Software-Defined Data Center

Am 22.08.2017 vom Typ: Troubleshooting
Titel: Host reports lost communication with ESX module when using instant clone

Am 22.08.2017 vom Typ: Troubleshooting
Titel: „fsck failed“ error when starting vCenter Server Appliance

Am 22.08.2017 vom Typ: Informational, Licensing
Titel: Technology Guarantee and Subscription Fulfillment for VMware Workstation Pro and Player

Am 22.08.2017 vom Typ: Troubleshooting
Titel: Large Java dump files created in the location /storage/log/vmware/perfcharts

Am 22.08.2017 vom Typ: Informational
Titel: Installing and using Microsoft Office Products with VMware App Volumes 2.x

Am 22.08.2017 vom Typ: How to, Troubleshooting
Titel: VIO DNS update in vSphere web plug-in is not reflected in VIO deployment

Am 22.08.2017 vom Typ: Troubleshooting
Titel: VCenter Server fails to start with „Remote login failed:N3Vim5Fault9HttpFault9ExceptionE(vim.fault.HttpFault)“, After vCenter Server is restored from backup or snapshot

Am 22.08.2017 vom Typ: Troubleshooting
Titel: Intermittent network disconnection when using Windows 2012 and E1000 adapter

Am 22.08.2017 vom Typ: Troubleshooting
Titel: Backing up NSX Manager data fails in JP locale

Am 22.08.2017 vom Typ: Troubleshooting
Titel: Adding or modifying interfaces to edge fails with a blank error message

Am 22.08.2017 vom Typ: Troubleshooting
Titel: VIO Heat Stack Create/Launch Fails With „expected , but found ““

Am 22.08.2017 vom Typ: Troubleshooting
Titel: VIO Heat Stack Create Fails With „AttributeError: ‚unicode‘ object has no attribute ‚get'“ error

Am 22.08.2017 vom Typ: Informational, Troubleshooting
Titel: VIO When Adding new datastores to compute node Horizon Dashboard does not report space correctly

Am 22.08.2017 vom Typ: Troubleshooting
Titel: ESXi host fails to connect with the NSX controllers

Am 22.08.2017 vom Typ: Troubleshooting
Titel: ESXi host crashes with PF Exception 14 PSOD caused by lpfc driver

Am 22.08.2017 vom Typ: Best Practices, How to, Informational, Troubleshooting
Titel: Cannot perform vMotion when AppStacks or Writable volumes are attached

Am 22.08.2017 vom Typ: Troubleshooting
Titel: PSC partner shows multiple changes behind partner and does not get replicated properly

Am 22.08.2017 vom Typ: Troubleshooting
Titel: VIO Creating/launching Heat Stack fails with the error: ERROR: … is not a list

Am 22.08.2017 vom Typ: Troubleshooting
Titel: Intel i40e driver leading to PSOD containing „i40e_lan_xmit_frame“

Am 22.08.2017 vom Typ: Troubleshooting
Titel: VIO Not all the volumes attached to an instance are correctly shown up inside a Linux guest OS.

Ausführliche Auflistung:

Titel: Uploading diagnostic information for VMware

Knowledgebase Nr: 1008525

Kategorie: How to

Aktualisiert: 22.08.2017

Link zum Artikel: 1008525

Beschreibung:
VMware Technical Support uses a set of diagnostic information obtained from our products when addressing a support request. This diagnostic information contains product specific logs and configuration files from the host on which the product is run. This information is gathered using a specific script or tool within the product. For more information on obtaining the diagnostic information, see Collecting diagnostic information for VMware products (1008524). After you obtain the necessary…
… Für weitere Details den Link zum Artikel anklicken

Titel: Certificate Generation Utility for VMware Validated Design for Software-Defined Data Center

Knowledgebase Nr: 2146215

Aktualisiert: 22.08.2017

Für Produkte: VMware Validated Designed for Software-Defined Data Center (SDDC) 2.0.x, VMware Validated Designed for Software-Defined Data Center (SDDC) 3.0.x, VMware Validated Designed for Software-Defined Data Center (SDDC) 4.0.x

Link zum Artikel: 2146215

Beschreibung:
About Certificate Generation Utility for VMware Validated Designs The Certificate Generation Utility for VMware Validated Designs (CertGenVVD) is a command-line utility that you can use to generate custom certificates for the products that you use to build a Software-Define Data Center (SDDC) based on VMware Validated Design for Software-Defined Data Center. Use the utility to reduce the number of steps for end-to-end certificate replacement. CertGenVVD is based on PowerShell. It operates…
… Für weitere Details den Link zum Artikel anklicken

Titel: Host reports lost communication with ESX module when using instant clone

Knowledgebase Nr: 2148690

Kategorie: Troubleshooting

Aktualisiert: 22.08.2017

Für Produkte: VMware NSX for vSphere 6.2.x, VMware NSX for vSphere 6.3.x

Link zum Artikel: 2148690

Beschreibung:
After deploying a Guest Introspection on an ESXi host with Instant Clone VMs running the Thin agent, the Guest Introspection service goes into Warning status on the Service Deployment. On the host, under Monitor > Guest Introspection, you see an error similar to: Lost communication with ESX module.
… Für weitere Details den Link zum Artikel anklicken

Titel: „fsck failed“ error when starting vCenter Server Appliance

Knowledgebase Nr: 2081464

Aktualisiert: 22.08.2017

Link zum Artikel: 2081464

Beschreibung:
Cannot start the VMware vCenter Server Appliance. You see these errors: fsck failed. Please repair manually and reboot. The root file system is currently mounted read-only. To remount it read-write do:bash# mount -n -o remount,rw /Attention: Only CONTROL-D will reboot the system in thismaintanance mode. Shutdown or reboot will not work.Give root password for maintenance(or type Control-D to continue): /dev/mapper/log_vg-log: UNEXPECTED INCONSISTENCY: RUN fsck MANUALLY
… Für weitere Details den Link zum Artikel anklicken

Titel: Technology Guarantee and Subscription Fulfillment for VMware Workstation Pro and Player

Knowledgebase Nr: 2093259

Kategorie: Informational, Licensing

Aktualisiert: 22.08.2017

Für Produkte: VMware Workstation 11.x (for Linux), VMware Workstation 11.x (for Windows)

Link zum Artikel: 2093259

Beschreibung:
This article provides information about obtaining free licenses for VMware Workstation 14 Pro/Player.
… Für weitere Details den Link zum Artikel anklicken

Titel: Large Java dump files created in the location /storage/log/vmware/perfcharts

Knowledgebase Nr: 2151394

Aktualisiert: 22.08.2017

Für Produkte: VMware vCenter Server 6.5.x

Link zum Artikel: 2151394

Beschreibung:
You see that /storage/log directory is full and critical state in the appliance manager page in VCSA 6.5. You see that large Java dump files were created at /storage/log/vmware/perfcharts. You see the alerts triggered in the vCenter VAMI page. You notice that /storage/log is almost full. root@VCENTER [ ~ ]# df -h Filesystem Size Used Avail Use% Mounted on /dev/mapper/autodeploy_vg-autodeploy 9.8G 33M 9.2G 1% /storage/autodeploy…
… Für weitere Details den Link zum Artikel anklicken

Titel: Installing and using Microsoft Office Products with VMware App Volumes 2.x

Knowledgebase Nr: 2146035

Kategorie: Informational

Aktualisiert: 22.08.2017

Für Produkte: VMware App Volumes 2.10.x, VMware App Volumes 2.11.x, VMware App Volumes 2.12.x, VMware App Volumes 2.9.x

Link zum Artikel: 2146035

Beschreibung:
This article provides instructions and best practices on how to install and use Microsoft Office Products with VMware App Volumes.
… Für weitere Details den Link zum Artikel anklicken

Titel: VIO DNS update in vSphere web plug-in is not reflected in VIO deployment

Knowledgebase Nr: 2149249

Kategorie: How to, Troubleshooting

Aktualisiert: 22.08.2017

Für Produkte: VMware Integrated OpenStack 2.0.x, VMware Integrated OpenStack 2.5.x, VMware Integrated OpenStack 3.0.x

Link zum Artikel: 2149249

Beschreibung:
After updating the Deployment DNS through the VIO plug-in in the web client, the update is not reflected in the deployment: Log in vSphere web client. Select the VIO plug-in. Select the Manage tab on the Right Panel. Select Networks. Right-click on one of the networks and select Change DNS. Edit the DNS, select OK. log to one of the VIO deployment as root user , the /etc/resolv.conf is not updated.
… Für weitere Details den Link zum Artikel anklicken

Titel: VCenter Server fails to start with „Remote login failed:N3Vim5Fault9HttpFault9ExceptionE(vim.fault.HttpFault)“, After vCenter Server is restored from backup or snapshot

Knowledgebase Nr: 2149010

Aktualisiert: 22.08.2017

Für Produkte: VMware vCenter Server 6.5.x, VMware vCenter Server Appliance 6.5.x

Link zum Artikel: 2149010

Beschreibung:
After restoring vCenter Server or vCenter Server Appliance from backup or a snapshot, you experience these symptoms: In the /var/log/vmware/vpxd/vpxd.log file, you see entries similar to: 2017-02-10T16:54:07.586Z warning vpxd[7F38BD9C2700] [Originator@6876 sub=Default] Failed to connect socket; <io_obj p:0x00007f38a41cc910, h:32, <TCP ‚0.0.0.0:0‘>, <TCP ‚127.0.0.1:10080‘>>, e: system:111(Connection refused) 2017-02-10T16:54:07.586Z warning vpxd[7F38CC164800]…
… Für weitere Details den Link zum Artikel anklicken

Titel: Intermittent network disconnection when using Windows 2012 and E1000 adapter

Knowledgebase Nr: 2142564

Aktualisiert: 22.08.2017

Für Produkte: VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware Fusion 8.x

Link zum Artikel: 2142564

Beschreibung:
Intermittent network disconnect when using Windows 2012 and E1000 adapter. Updating to ESXi 6.0 Update 2 as recommended in Windows 2012 virtual machines using E1000/E1000e driver experience loss of network connectivity (2109922) does not help.
… Für weitere Details den Link zum Artikel anklicken

Titel: Backing up NSX Manager data fails in JP locale

Knowledgebase Nr: 2150844

Kategorie: Troubleshooting

Aktualisiert: 22.08.2017

Für Produkte: VMware NSX for vSphere 6.2.x, VMware NSX for vSphere 6.3.x

Link zum Artikel: 2150844

Beschreibung:
NSX Manager backup fails. You see the error:File upload action aborted due to insufficient storage or invalid file name.( 550 The filename, directory name, or volume label syntax is incorrect. ) NSX Manager Locale configuration is set to JP (ja-JP). To see current locale settings, log in to the NSX Manager virtual appliance and navigate to Manage Appliance Settings > Locale. An error is logged in FTP server side logs with filename containing special character ? as short name of the day.
… Für weitere Details den Link zum Artikel anklicken

Titel: Adding or modifying interfaces to edge fails with a blank error message

Knowledgebase Nr: 2151309

Kategorie: Troubleshooting

Aktualisiert: 22.08.2017

Für Produkte: VMware NSX for vSphere 6.3.x

Link zum Artikel: 2151309

Beschreibung:
Adding a new interface to existing ESG or DLR in NSX for vSphere 6.3.2, clicking on submit throws NULL pointer exception in UI. Modifying the interface configuration for an existing ESG or DLR fails. In the virgo.log file, you see entries similar to: [WARN ] http-bio-9090-exec-7 org.springframework.flex.core.DefaultExceptionLogger The following exception occurred during request processing by the BlazeDS MessageBroker and will be serialized back to the client: flex.messaging.MessageException:…
… Für weitere Details den Link zum Artikel anklicken

Titel: VIO Heat Stack Create/Launch Fails With „expected , but found ““

Knowledgebase Nr: 2151149

Kategorie: Troubleshooting

Aktualisiert: 22.08.2017

Link zum Artikel: 2151149

Beschreibung:
Launching heat stack from horizon dashboard fails with this error:while parsing a block mapping in „<unicode string>“, line 37, column 3: nova_instance_info: ^ expected <block end>, but found ‚<block mapping start>‘ in „<unicode string>“, line 39, column 4: properties: ^Debug message from python-openstackclient CLI output.# openstack –debug stack create -t heatTest.yml TestStackName### lines omitted for brevity ###File…
… Für weitere Details den Link zum Artikel anklicken

Titel: VIO Heat Stack Create Fails With „AttributeError: ‚unicode‘ object has no attribute ‚get'“ error

Knowledgebase Nr: 2151148

Kategorie: Troubleshooting

Aktualisiert: 22.08.2017

Link zum Artikel: 2151148

Beschreibung:
Deploying heat stack fails with the following errors. Horizon Dashboard UI message:Error: ERROR: ‚unicode‘ object has no attribute ‚get’Debug message from python-heatclient CLI output. File „/usr/local/lib/python2.7/dist-packages/heatclient/common/http.py“, line 317, in requestraise exc.from_response(resp)heatclient.exc.HTTPBadRequest: ERROR: ‚unicode‘ object has no attribute ‚get’Debug message from python-openstackclient CLI output.File…
… Für weitere Details den Link zum Artikel anklicken

Titel: VIO When Adding new datastores to compute node Horizon Dashboard does not report space correctly

Knowledgebase Nr: 2151305

Kategorie: Informational, Troubleshooting

Aktualisiert: 22.08.2017

Für Produkte: VMware Integrated OpenStack 3.0.x, VMware Integrated OpenStack 3.1.x

Link zum Artikel: 2151305

Beschreibung:
When Adding new datastores to compute node, Horizon Dashboard does not report space correctly.New datastores are added using the following steps: In vCenter, select Home > VMware Integrated OpenStack > Manage. Click the Nova Storage tab. This tab displays the datastores that are currently available, their status, and other details. Click the green plus-sign icon (+) at the top of the panel. On the Select a Nova node page of the Add Nova Datastores dialog box, select the cluster to…
… Für weitere Details den Link zum Artikel anklicken

Titel: ESXi host fails to connect with the NSX controllers

Knowledgebase Nr: 2151089

Kategorie: Troubleshooting

Aktualisiert: 22.08.2017

Für Produkte: VMware NSX for vSphere 6.2.x

Link zum Artikel: 2151089

Beschreibung:
ESXi host is unable to connect to the Control Plane In the netcpa.log file, you see entries similar to:2017-06-07T00:47:56.461Z error netcpa[37140B70] [Originator@6876 sub=Default] SSL handshake failed on 172.16.0.11:0 : error = SSL Exception: error:140000DB:SSL routines:SSL routines:short read2017-06-07T03:17:57.439Z error netcpa[37603B70] [Originator@6876 sub=Default] SSL handshake failed on 172.16.0.11:0 : error = SSL Exception: error:140000DB:SSL routines:SSL routines:short…
… Für weitere Details den Link zum Artikel anklicken

Titel: ESXi host crashes with PF Exception 14 PSOD caused by lpfc driver

Knowledgebase Nr: 2151391

Aktualisiert: 22.08.2017

Für Produkte: VMware ESXi 6.0.x

Link zum Artikel: 2151391

Beschreibung:
ESXi host crashes with PF Exception 14 PSOD.You see the PSOD backtraces similar to either of these:2017-04-01T13:44:24.863Z cpu21:32908)@BlueScreen: #PF Exception 14 in world 32908:retireWld.00 IP 0x418019e95f5e addr 0x0PTEs:0x146a6b027;0x148d7c027;0x0;2017-04-01T13:44:24.863Z cpu21:32908)Code start: 0x418019600000 VMK uptime: 8:21:16:47.8992017-04-01T13:44:24.863Z cpu21:32908)0x4390c461b600:[0x418019e95f5e]lpfc_scsi_cmd_iocb_cmpl@<None>#<None>+0x5da stack:…
… Für weitere Details den Link zum Artikel anklicken

Titel: Cannot perform vMotion when AppStacks or Writable volumes are attached

Knowledgebase Nr: 2144266

Kategorie: Best Practices, How to, Informational, Troubleshooting

Aktualisiert: 22.08.2017

Für Produkte: VMware App Volumes 2.10.x, VMware App Volumes 2.11.x, VMware App Volumes 2.12.x, VMware App Volumes 2.5.x, VMware App Volumes 2.6.0, VMware App Volumes 2.7.x, VMware App Volumes 2.9.x

Link zum Artikel: 2144266

Beschreibung:
Cannot perform vMotion when AppStacks or Writable volumes are attachedUnable to power on the virtual machine due to lock on AppStack or Writable Volume.
… Für weitere Details den Link zum Artikel anklicken

Titel: PSC partner shows multiple changes behind partner and does not get replicated properly

Knowledgebase Nr: 2151395

Aktualisiert: 22.08.2017

Für Produkte: VMware vCenter Server 6.0.x, VMware vCenter Server 6.5.x

Link zum Artikel: 2151395

Beschreibung:
When checking showpartnerstatus PSC shows multiple changes behind partner after running below commands:/usr/lib/vmware-vmdir/bin/vdcrepadmin -f showpartnerstatus -h localhost -u administrator When using createagreement, replication appears to be setup properly and cannot be recreated and you see the error:/usr/lib/vmware-vmdir/bin/vdcrepadmin -f createagreement -2 -h localhost -H <PSC_name> -u administrator password: Vdcrepadmin failed. Error [Already exists] [68] In the…
… Für weitere Details den Link zum Artikel anklicken

Titel: VIO Creating/launching Heat Stack fails with the error: ERROR: … is not a list

Knowledgebase Nr: 2151151

Kategorie: Troubleshooting

Aktualisiert: 22.08.2017

Link zum Artikel: 2151151

Beschreibung:
Launching heat stack from horizon dashboard fails with this error:Error: ERROR: „u’AutoHeatBuildsNet'“ is not a listMessage from python-heatclient CLI output is similar to the following.# openstack stack create -t heatTest.yml HeatStackNameERROR: „u’AutoHeatBuildsNet'“ is not a list In the /var/log/heat/heat-api.log file, on one or more VIO controllers, you see entries similar to:2017-08-04 04:45:22.625 2590 ERROR heat.common.wsgi [req-067b3912-5666-4585-ae5a-8f5bb3237e1d – Project Default -…
… Für weitere Details den Link zum Artikel anklicken

Titel: Intel i40e driver leading to PSOD containing „i40e_lan_xmit_frame“

Knowledgebase Nr: 2150987

Aktualisiert: 22.08.2017

Für Produkte: VMware ESXi 5.5.x

Link
zum Artikel: 2150987

Beschreibung:
ESXi might crash into a PSOD when Intel NIC with driver i40e is installed
and the network is under heavy load, with a similar backtrace: 2016-12-07T05:53:21.896Z cpu5:39171)0x4124240dd868:[0x41801ace7827]i40e_lan_xmit_frame@<None>#<None>+0x56b stack: 0x4124240dd8002016-12-07T05:53:21.896Z cpu5:39171)0x4124240dd928:[0x41801aaf52ec]netdev_tx@com.vmware.driverAPI#9.2+0xf8 stack: 0x4109a855acc02016-12-07T05:53:21.896Z…
… Für weitere Details den Link zum Artikel anklicken

Titel: VIO Not all the volumes attached to an instance are correctly shown up inside a Linux guest OS.

Knowledgebase Nr: 2151093

Aktualisiert: 22.08.2017

Link zum Artikel: 2151093

Beschreibung:
After attaching some volumes to a Linux instance, not all of them, are correctly displayed inside the guest OS. For example: On Horizon VIO, seven volumes are attached to the instance. Inside Linux guest OS, only two of them are correctly displayed:[root@Linuxtest]# lsblkNAME MAJ:MIN RM SIZE RO TYPE MOUNTPOINTsda 8:0 0 12G 0 disk├─sda1 8:1 0 1M 0 part├─sda2 8:2 0 200M 0 part /boot└─sda3 8:3 0 4.8G 0 part└─VolGroup00-LogVol00 253:0 0 4.6G 0 lvm /sdb 8:16 0 10G 0 disksr0 11:0 1 548K 0 rom …
… Für weitere Details den Link zum Artikel anklicken

Zurück nach oben

22.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 21.08.2017 bis zum 22.08.2017 wurden 21 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 21.08.2017 vom Typ: Best Practices, How to
Titel: How to unmount a LUN or detach a datastore device from ESXi hosts

Am 21.08.2017 vom Typ: How to, Informational, Licensing, Staff Picks
Titel: Account Change Form (ACF)

Am 21.08.2017 vom Typ: Informational
Titel: VMware vSphere 5.x and 6.x support with NetApp MetroCluster

Am 21.08.2017 vom Typ: Troubleshooting
Titel: /storage/log becomes 100% full when exporting the vCenter Appliance log bundles

Am 21.08.2017 vom Typ: Informational
Titel: Troubleshooting the NSX Manager Web Client Plug-In in NSX for vSphere 6.x

Am 21.08.2017 vom Typ: Best Practices, Troubleshooting
Titel: Windows vCenter Server upgrade fails with the error „Installation of component VMware vCenter Server failed with error code 3010“

Am 21.08.2017 vom Typ: Troubleshooting
Titel: ESXi host fails with PSOD when using Intel Xeon Processor E5 v4, E7 v4, and D-1500 families

Am 21.08.2017 vom Typ: Troubleshooting
Titel: Disabling hardware accelerated locking (ATS) in ESXi

Am 21.08.2017 vom Typ: Troubleshooting
Titel: vRA 6.2.x multi-machine blueprints timeout from component building timeout

Am 21.08.2017 vom Typ: Troubleshooting
Titel: Unable to view any groups in directory Sync Settings ‚Groups‘ tab after upgrading from vRA 7.2 to 7.3

Am 21.08.2017 vom Typ: Troubleshooting
Titel: „Cannot connect the virtual device IDE0:0….“ error when you power on the vRB appliance in vSphere Web Client

Am 21.08.2017 vom Typ: Troubleshooting
Titel: VMware tools do not run on vRB appliance post deployment unless the appliance is reset

Am 21.08.2017 vom Typ: Best Practices, Informational, Troubleshooting
Titel: „No Networking Detected“ error on VMware Identity Manager

Am 21.08.2017 vom Typ: How to, Informational, Licensing
Titel: How to email supporting documents for Account Information changes

Am 21.08.2017 vom Typ: Best Practices, Informational, Licensing
Titel: Account Name Change – Supporting Documents

Am 21.08.2017 vom Typ: Troubleshooting
Titel: vRealize Automation plugin for vRealize Orchestrator reports a „Plug-in Error“

Am 21.08.2017 vom Typ: Troubleshooting
Titel: „HTTP Status 404“ error seen when you download for Java Runtime Environment in vRA 7.3

Am 21.08.2017 vom Typ: Best Practices, Informational, Licensing
Titel: Account Name Change – Less than 3 characters

Am 21.08.2017 vom Typ: Troubleshooting
Titel: „Error creating network vxw-dvs-44-universalwire-431-sid-20160-CBProuted-862d8b0b-4005-4cc6-acf6-ad7b7e7 – Error while waiting for the portgroup to be created“ when provisioning Converged blueprint in vRA

Am 21.08.2017 vom Typ: Troubleshooting
Titel: „Server restart is required because of not applied configuration change“ error in vRO Control Center

Am 21.08.2017 vom Typ: Patch, Troubleshooting
Titel: „The current data type SECURE_STRING for the ‚xxxxxxxxx‘ field must be STRING with API operation“ error when submitting a blueprint in vRA that contains encrypted properties

Ausführliche Auflistung:

Titel: How to unmount a LUN or detach a datastore device from ESXi hosts

Knowledgebase Nr: 2004605

Kategorie: Best Practices, How to

Aktualisiert: 21.08.2017

Für Produkte: VMware ESXi 5.0.x, VMware ESXi 5.1.x, VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2004605

Beschreibung:
This article provides steps to unmount a LUN from an ESXi 5.x/6.x host, which includes unmounting the file system and detaching the datastore/storage device. These steps must be performed for each ESXi host.Note: The documented method using the vSphere Client is limited to detaching the device on a per-host basis. To detach a storage device from multiple hosts at the same time, see Automating detaching datastores using PowerCLI and the vSphere SDK for Perl in the Resolution section in this…
… Für weitere Details den Link zum Artikel anklicken

Titel: Account Change Form (ACF)

Knowledgebase Nr: 2016489

Kategorie: How to, Informational, Licensing, Staff Picks

Aktualisiert: 21.08.2017

Link zum Artikel: 2016489

Beschreibung:
This article provides information about how to submit an Account Name change request in My VMware.
… Für weitere Details den Link zum Artikel anklicken

Titel: VMware vSphere 5.x and 6.x support with NetApp MetroCluster

Knowledgebase Nr: 2031038

Kategorie: Informational

Aktualisiert: 21.08.2017

Für Produkte: VMware ESXi 5.0.x, VMware ESXi 5.1.x, VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2031038

Beschreibung:
This article provides information about deploying a vSphere Metro Storage Cluster (vMSC) across two datacenters or sites using the NetApp MetroCluster Solution with vSphere 5.5, 6.0 and 6.5 for ESXi 5.5, 6.0 and 6.5. This article applies for FC, FCoE, iSCSI, and NFS implementations of MetroCluster on ONTAP 9.0, 9.1 and 9.2.
… Für weitere Details den Link zum Artikel anklicken

Titel: /storage/log becomes 100% full when exporting the vCenter Appliance log bundles

Knowledgebase Nr: 2151389

Aktualisiert: 21.08.2017

Für Produkte: VMware vCenter Server Appliance 6.0.x, VMware vCenter Server Appliance 6.5.x

Link zum Artikel: 2151389

Beschreibung:
The below partition becomes 100% full while trying to generate a vCenter Appliance log bundleFilesystem Size Used Avail Use% Mounted on /dev/mapper/log_vg-log 9.9G 4.1G 5.3G 44% /storage/log Even if we collect only the vCenter Logs without any Host, the log bundle seems to be of a relatively large size. For example: The generated log bundle was more than 5GB.
… Für weitere Details den Link zum Artikel anklicken

Titel: Troubleshooting the NSX Manager Web Client Plug-In in NSX for vSphere 6.x

Knowledgebase Nr: 2126701

Kategorie: Informational

Aktualisiert: 21.08.2017

Für Produkte: VMware NSX for vSphere 6.1.x, VMware NSX for vSphere 6.2.x, VMware NSX for vSphere 6.3.x

Link zum Artikel: 2126701

Beschreibung:
This article provides information on understanding and troubleshooting the vSphere Web client plug-in for VMware NSX for vSphere 6.x. Overview of NSX Plug-Ins The VMware NSX plug-in consists of several plug-ins which provide the contents shown at the user interface (UI). This also bridge the user interface and NSX Manager. The separate plug-ins are packaged and compressed to a /home/secureall/secureall/sem/vsmext.zip file in NSX Manager. The vsmext.zip file also includes a plugin-package.xml…
… Für weitere Details den Link zum Artikel anklicken

Titel: Windows vCenter Server upgrade fails with the error „Installation of component VMware vCenter Server failed with error code 3010“

Knowledgebase Nr: 2149266

Kategorie: Best Practices, Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware vCenter Server 6.0.x

Link zum Artikel: 2149266

Beschreibung:
Windows vCenter Server 6.x upgrade fails with the error:“Installation of component VMware vCenter Server failed with error code ‚3010‘. Check the logs for more details“ In the %TEMP%vminst.log file, you see entries similar to:<YYYY-MM-DD>T<TIME>| vcsInstUtil-5318198| E: wWinMain: MSI result of install of „E:vCenter-ServerPackagesvmware-vpxd.msi“ may have failed: 3010 (0x00000bc2)<YYYY-MM-DD>T<TIME>| vcsInstUtil-4541944| E: LaunchPkgMgr: Operation on vmware-vpxd.msi…
… Für weitere Details den Link zum Artikel anklicken

Titel: ESXi host fails with PSOD when using Intel Xeon Processor E5 v4, E7 v4, and D-1500 families

Knowledgebase Nr: 2146388

Kategorie: Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2146388

Beschreibung:
When running a supported version of ESXi host with Intel Xeon Processor E5 v4, E7 v4, and D-1500 families, you may experience these symptoms: The ESXi host fails with this purple diagnostic screen (PSOD) The backtrace information is missing in the screen In the PSOD screen, you see error similar to:2016-07-27T13:14:04.549Z cpu58:42053 )@BlueScreen: #PF Exception 14 in world 42053:vmm7:My_VM IP 0x410016bb8000 addr 0x410016bb8000…
… Für weitere Details den Link zum Artikel anklicken

Titel: Disabling hardware accelerated locking (ATS) in ESXi

Knowledgebase Nr: 2146451

Aktualisiert: 21.08.2017

Für Produkte: VMware ESXi 5.5.x, VMware ESXi 6.0.x, VMware ESXi 6.5.x

Link zum Artikel: 2146451

Beschreibung:
This article provides steps to disable ATS usage at different levels. In a shared storage environment, when multiple hosts access the same VMFS datastore, specific locking mechanisms are used. These locking mechanism prevent multiple hosts from concurrently writing to the metadata and ensure that no data corruption occurs. VMFS supports SCSI Reservations and Atomic Test and Set (ATS) locking. ATS-only is a VAAI primitive on VMFS-5 datastores and supported VAAI-enabled arrays which performs…
… Für weitere Details den Link zum Artikel anklicken

Titel: vRA 6.2.x multi-machine blueprints timeout from component building timeout

Knowledgebase Nr: 2150494

Kategorie: Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware vRealize Automation 6.2.x

Link zum Artikel: 2150494

Beschreibung:
Provisioning from multi-machine blueprints where components have a long running building machine state time out. Multi-machine is disposed while component machine is still in building machine state showing errors in the DEM workers similar to:[UTC:2015-11-24 02:59:23 Local:2015-11-24 13:59:23] [Trace]: Thread-Id: 18 – AppServiceModel: The SetTimeout activity started for machine mm-001311.[UTC:2015-11-24 02:59:23 Local:2015-11-24 13:59:23] [Trace]: Thread-Id: 18 – AppServiceModel: The…
… Für weitere Details den Link zum Artikel anklicken

Titel: Unable to view any groups in directory Sync Settings ‚Groups‘ tab after upgrading from vRA 7.2 to 7.3

Knowledgebase Nr: 2151286

Kategorie: Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware vRealize Automation 7.3.x

Link zum Artikel: 2151286

Beschreibung:
After upgrading from vRA 7.2 to 7.3, you see these symptoms: Unable to view any groups in directory Sync Settings > Groups tab. Navigating to Administration > Directories Management > Directories > Sync Settings > Groups tab, it keeps loading but does not populate any groups.
… Für weitere Details den Link zum Artikel anklicken

Titel: „Cannot connect the virtual device IDE0:0….“ error when you power on the vRB appliance in vSphere Web Client

Knowledgebase Nr: 2151287

Kategorie: Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware vRealize Business for Cloud Advanced 7.x, VMware vRealize Business for Cloud Standard 7.x

Link zum Artikel: 2151287

Beschreibung:
When powering on the vRealize Business appliance, you see this message in the vSphere Web Client: Cannot connect the virtual device IDE0:0 because no corresponding device is available on the host. Do you want to try to connect this virtual device every time you power on the virtual machine?
… Für weitere Details den Link zum Artikel anklicken

Titel: VMware tools do not run on vRB appliance post deployment unless the appliance is reset

Knowledgebase Nr: 2151269

Kategorie: Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware vRealize Business for Cloud Advanced 7.x, VMware vRealize Business for Cloud Standard 7.x

Link zum Artikel: 2151269

Beschreibung:
VMware tools do not run on vRB appliance post deployment.
… Für weitere Details den Link zum Artikel anklicken

Titel: „No Networking Detected“ error on VMware Identity Manager

Knowledgebase Nr: 2146195

Kategorie: Best Practices, Informational, Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware Identity Manager 2.x, VMware Workspace Portal 2.x

Link zum Artikel: 2146195

Beschreibung:
Reboot of the appliance fails after an upgrade of Identity Manager You see the error: RED BANNER MESSAGE: „NO NETWORKING DETECTED. PLEASE LOGIN AND RUN THE COMMAND /opt/vmware/share/vami/vami_config_net TO CONFIGURE THE NETWORK“
… Für weitere Details den Link zum Artikel anklicken

Titel: How to email supporting documents for Account Information changes

Knowledgebase Nr: 2151295

Kategorie: How to, Informational, Licensing

Aktualisiert: 21.08.2017

Link zum Artikel: 2151295

Beschreibung:
This article provides information about how to email supporting document(s) to VMware for Account Name change requests.
… Für weitere Details den Link zum Artikel anklicken

Titel: Account Name Change – Supporting Documents

Knowledgebase Nr: 2151296

Kategorie: Best Practices, Informational, Licensing

Aktualisiert: 21.08.2017

Link zum Artikel: 2151296

Beschreibung:
This article provides information about the supporting document(s) that should be furnished for the Account Name Change requests.
… Für weitere Details den Link zum Artikel anklicken

Titel: vRealize Automation plugin for vRealize Orchestrator reports a „Plug-in Error“

Knowledgebase Nr: 2150910

Kategorie: Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware vRealize Automation 7.2.x, VMware vRealize Orchestrator 7.2.x

Link zum Artikel: 2150910

Beschreibung:
You change the service account password for the service account used to run the Add a vRA host workflow in vRealize Orchestrator. The Update vRA host and Remove vRA host workflows will not let you select a host. If you expand the vRealize automation plug-in on the inventory tab, the UI reports a Plug-in Error. When running the Add a vRA host workflow, the workflow logs report entries similar to:[2017-07-11 15:25:32.486] [E] ReferenceError: „vCACCAFEHostManager“ is not defined. (Workflow:Add…
… Für weitere Details den Link zum Artikel anklicken

Titel: „HTTP Status 404“ error seen when you download for Java Runtime Environment in vRA 7.3

Knowledgebase Nr: 2151138

Kategorie: Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware vRealize Automation 7.3.x

Link zum Artikel: 2151138

Beschreibung:
When you click on the link to download Linux Software Installers, you see these symptoms: Download link for Java Runtime Environment fails with the error: HTTP Status 404 . You are using the download links:https://vra_fqdn/software/download/vmware-jre-1.8.0_121-fcs.x86_64.rpmandhttps://vra_fqdn/software/download/vmware-jre-1.8.0_121-fcs.i586.rpm
… Für weitere Details den Link zum Artikel anklicken

Titel: Account Name Change – Less than 3 characters

Knowledgebase Nr: 2151297

Kategorie: Best Practices, Informational, Licensing

Aktualisiert: 21.08.2017

Link zum Artikel: 2151297

Beschreibung:
This article provides information about how to submit an Account Name Change request for spelling error that requires change of three characters or less in My VMware.
… Für weitere Details den Link zum Artikel anklicken

Titel: „Error creating network vxw-dvs-44-universalwire-431-sid-20160-CBProuted-862d8b0b-4005-4cc6-acf6-ad7b7e7 – Error while waiting for the portgroup to be created“ when provisioning Converged blueprint in vRA

Knowledgebase Nr: 2151271

Kategorie: Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware vRealize Business for Cloud Advanced 7.x, VMware vRealize Business for Cloud Standard 7.x

Link zum Artikel: 2151271

Beschreibung:
Converged blueprint provisioning in vRA fails. You see an error similar to:Error creating network vxw-dvs-44-universalwire-431-sid-20160-CBProuted-862d8b0b-4005-4cc6-acf6-ad7b7e7 – Error while waiting for the portgroup to be created Destroy requests in vRA fails. You see an error similar to:CBProuted. java.lang.RuntimeException: Failed to perform operation deleteNetwork after 5 retries. Aborting. Failure details of the last attempt: [universalwire-293
resource
is still in use by 2 number of…
… Für weitere Details den Link zum Artikel anklicken

Titel: „Server restart is required because of not applied configuration change“ error in vRO Control Center

Knowledgebase Nr: 2151288

Kategorie: Troubleshooting

Aktualisiert:
21.08.2017

Für Produkte: VMware vRealize Orchestrator 7.3.x

Link zum Artikel: 2151288

Beschreibung:
After restart of services or complete restart of host appliance, in the vRealize Orchestrator Control
Center, you see error message similar to:   Server restart is required because of not applied configuration change.

… Für weitere Details den Link zum Artikel anklicken

Titel: „The current data type SECURE_STRING for the ‚xxxxxxxxx‘ field must be STRING with API operation“ error when submitting a blueprint in vRA that contains encrypted properties

Knowledgebase Nr: 2151292

Kategorie: Patch, Troubleshooting

Aktualisiert: 21.08.2017

Für Produkte: VMware vRealize Automation 7.3.x

Link zum Artikel: 2151292

Beschreibung:
When submitting a blueprint that contains an encrypted properties you see error
message similar to:The data specified within the request is invalid. The current data type SECURE_STRING
for the ‚xxx.propertyname‘ field must be STRING.
… Für weitere Details den Link zum Artikel anklicken

Zurück nach oben

21.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 20.08.2017 bis zum 21.08.2017 wurden 3 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 20.08.2017 vom Typ: Troubleshooting
Titel: Test recovery fails with an error: “ The host does not have sufficient resources to satisfy the reservation“

Am 20.08.2017 vom Typ: Troubleshooting
Titel: Provisioning a machine using VMware vRealize Automation fails with the error: Error executing query usp_SelectHostReservation

Am 20.08.2017 vom Typ: Troubleshooting
Titel: Various tasks fail while calling stored procedures with errors: „Error executing query usp_“

Ausführliche Auflistung:

Titel: Test recovery fails with an error: “ The host does not have sufficient resources to satisfy the reservation“

Knowledgebase Nr: 2151277

Aktualisiert: 20.08.2017

Link zum Artikel: 2151277

Beschreibung:
Test recovery plan fails with an error:The host does not have sufficient memory resources to satisfy the reservation. In the Dr.log file, you see entries similar to:2017-08-10T11:22:41.105-04:00 [02720 warning ‚VmDomain‘ opID=46a8a38c] VC is not attmepted power-on of requested VM [vim.VirtualMachine:vm-67]. Reason: (vim.fault.InsufficientHostMemoryCapacityFault) {–> dynamicType = <unset>,–> faultCause = (vmodl.MethodFault) null,–> host = ‚vim.HostSystem:host-29‘,–>…
… Für weitere Details den Link zum Artikel anklicken

Titel: Provisioning a machine using VMware vRealize Automation fails with the error: Error executing query usp_SelectHostReservation

Knowledgebase Nr: 2038943

Kategorie: Troubleshooting

Aktualisiert: 20.08.2017

Für Produkte: VMware vCloud Automation Center for Server 4.5.x, VMware vCloud Automation Center for Server 5.1.x, VMware vCloud Automation Center for Server 5.2.x, VMware vCloud Automation Center for Server 6.0.x, VMware vCloud Automation Center for Server 6.1.x, VMware vRealize Automation 6.2.x

Link zum Artikel: 2038943

Beschreibung:
Cannot provision a machine using VMware vRealize Automation (formerly known as VMware vCloud Automation Center) Provisioning a machine using VMware vRealize Automation fails You see the error:Error executing query usp_SelectHostReservation In the Event Viewer on the portal, you see an error similar to:INNER EXCEPTION: System.ApplicationException: INNER EXCEPTION: System.ApplicationException: Error executing query usp_SelectGroupSystem.Transactions.TransactionManagerCommunicationException:…
… Für weitere Details den Link zum Artikel anklicken

Titel: Various tasks fail while calling stored procedures with errors: „Error executing query usp_“

Knowledgebase Nr: 2089503

Kategorie: Troubleshooting

Aktualisiert: 20.08.2017

Für Produkte: VMware vCloud Automation Center for Server 6.1.x, VMware vRealize Automation 6.2.x

Link zum Artikel: 2089503

Beschreibung:
After upgrading or migrating to vRealize Automation (formerly known as vCloud Automation Center) 6.1 or 6.2, various tasks (such as data collections, provisioning, destroying machines and other tasks) fail. After a new installation of vRealize Automation 6.1 or later, you see tasks failing due to stored procedure failures. In the vRealize Automation admin log files, you may see Microsoft Distributed Transaction Coordinator (MSDTC) errors. You see errors similar to these within…
… Für weitere Details den Link zum Artikel anklicken

Zurück nach oben

20.08.2017 – #Mightycare News: Neue #VMware #KnowledgeBase Artikel veröffentlicht

Vom 19.08.2017 bis zum 20.08.2017 wurden 1 Knowledgebase Artikel veröffentlicht.

Liste der veröffentlichten Knowledgebase Artikel von VMware:

Am 19.08.2017 vom Typ: How to, Informational, Licensing, Staff Picks
Titel: Account Change Form (ACF)

Ausführliche Auflistung:

Titel: Account Change Form (ACF)

Knowledgebase Nr: 2016489

Kategorie: How to, Informational, Licensing, Staff Picks

Aktualisiert: 19.08.2017

Link zum Artikel: 2016489

Beschreibung:
This article provides information about how to submit an Account Name change request in My VMware.
… Für weitere Details den Link zum Artikel anklicken

Zurück nach oben